Airmar TM150 setup On May 28, 2018

If you use the Airmar TM 150 on a Lowrance I have found the Custom setting of single frequency 105 kHz gives me the best results. However you need to turn off the noise rejection to get those results.

The left side of this image has the default setting of Noise Rejection set at low and the right side is the Noise Rejection turned off. I don't know why this transducer doesn't perform well with the Noise Rejection on.

Lowrance TM 150 settings

by Bruce Samson under lowrance lowrance sonar lowrance sonar settings
0 Comments

Comments are closed for this article.